DESACTIVA ADBLOCK PARA VISUALIZAR LA PELICULA

     



– H2o Pumps from 1.35 $
How to make a #waterpump with their own hands at dwelling. #diy #Home made #h2o #pump from scrap elements.

For this we have to have:
1. Plastic jars with lids – 2 pcs.
2. Syringes – 2 pcs.
3. Motor 12 volts
4. Superglue + hotmelt
5. Wires.

Producing:
1. Minimize out the deal with in the center of the circle and make a hole equal to the diameter of the motor shaft. In my situation, 3 mm.
2. Minimize blade impeller. (I made the blade is far too large, it is much better to make them smaller sized (5-7 mm). Adhere to the disk.
PS Ring on the blades provide to enhance the stiffness, but it was odd.
3. Minimize off the base of the cans (It will be portion of the pump casing. The sizing is dependent on the peak of the impeller. There will have to be a reserve of a number of millimeters) and make 2 holes. A single side angle equal to the internal diameter of the syringe (By the rotational course of the blades). In my situation, 10 mm (12 mm syringe). A 2nd hole for the protruding part of the engine.
4. Minimize off the syringe at an angle and then somewhat rounded scalpel for a comfortable in good shape to the curve of the financial institutions. Adhere to the incredibly hot melt adhesive. Then superglue to glue engine.
5. In the deal with to make a hole for h2o ingestion 10 mm and glue gun.
6. On the side to make a cutout for the syringe.
7. fall of superglue to the center of the impeller and in good shape on to the motor shaft. Drip a minor glue for a much better placing.
8. On the inside of the lid cause incredibly hot melt and adhere to the base of the jars.
9. Solder the wires to the engine and tie them in a knot.
10. At the base of the can do a modest hole less than the wire and thrust wire in it.
11. Glue the motor housing to the pump casing, working with incredibly hot melt glue. Shёv cautiously fluff melting for a much better seal.
12. Seal the hole exit wire incredibly hot glue.
13. The pump is completely ready. It is safe and sound to decrease it into the h2o and practical experience the overall performance. If you do not dangle, then transform the polarity.

ENLACES DE DESCARGA

Cashback 7% Aliexpress:
Partnership application AliExpress:

I share all that I am doing own hands at dwelling. The channel you will see home made, crafts, repair of devices, experiments, checks, unpacking and evaluate goods from China (Aliexpress), many home handbook. I also will share my inventions and interesting concepts to strengthen and simplify the everyday living (everyday living hacking).

Movies demonstrated on that channel, present the individual practical experience and are entertaining. For all that you do, you answer you. Observe warning and safety regulations.

///////////////// SUBSCRIBE \\\\
********** ***********
////////////////////////////////////////////////

////////////// MY CHANNELS \\\
– Are living Laugh
– Alexander Dikovinniy
– Dikovinniy Globe
– Animals and Enjoyment

**************** PLAYLISTS ****************
goo.gl/lTXljH – Instuctions
goo.gl/Jy8Xjd – Parcels, Opinions, Assessments
goo.gl/RtQfXg – H2o System
goo.gl/u4Snhv – Exciting Thoughts
goo.gl/LzpXou – Repairs
goo.gl/lzM9Yg – Toyota Camry Gracia
goo.gl/zOHwUB – The use of plastic PET bottles Do it yourself
**********************************************

Audio:
1 – Real_Globe
2 – Opening_Evening
3 – The composition of “Believe Tank” belong to the performer Audionautix. License: Creative Commons Attribution (
Artist:
4 – Movin

/////////////////= Assist CHANNEL =/////////////////
PayPal: Dikovinniy@yandex.ru
Webmoney (WMZ-dollars): Z315805724463

COMPARTELO EN LAS REDES SOCIALES

Processing your request, Please wait....

Category:

Videos Populares